Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Hydration

Problem Solvers Bottle Cage Height Adapter
$9.99
On a lot of frames, the bottle cage mounts just aren’t in the right place. If your bottle cage isn’t playing nice with your other accessories, Problem Solver's height-adjustable adapter might do the trick. With 45mm of fore-to-aft adjustability, you should be able to find the optimal position for your cage. -45mm of adjustability -28 oz water bottles max -Constructed of AL-6061
Zipp Vuka BTA Carbon Bottle Cage
$81.00
Designed and engineered specifically for the Vuka BTA mount, the Zipp Vuka Carbon BTA bottle cage is constructed completely from UD carbon fiber, for low weight and strength, as well as super secure bottle fitment. It's engineered to virtually eliminate bottle launch.
Campagnolo Super Record Carbon Water Bottle Holder w/Bottle
$103.00
Complete the look of your Super Record-equipped dream ride with Campagnolo's 18-gram Record Water Bottle Holder. This monocoque carbon marvel holds your bottle in the ideal position for quick and easy entry/exit. It's sleek, it's dreamy, it's 100% Campy.
Osprey Raptor 14
$140.00
Pump up your tires and head for the single track with the Raptor 14. The trail may be rough but your pack will carry close thanks to Osprey’s BioStretch harness and hipbelt that comfortably connect the pack to your body. Specially designed baffles in the 3.0 Liter LT liter Hydraulics reservoir reduce liquid movement for increased pack stability at high speed. The hydration sleeve is zippered for convenient refills and the hose routes over the right shoulder strap to the sternum strap where it anchors with a magnetic disk for on-the-fly access to the bite valve. The main compartment is accessible via a front zipper panel. There’s a stretch mesh front pocket for stashing a layer at the bottom of the big climb, zippered hipbelt pockets to keep a phone or other valuables secure, and a special scratch-free sunglass pocket to protect your shades. The LidLock helmet carry system gives you a place to secure your helmet when you’re off the bike. If you have mechanical troubles on the trail, a roll out tool pouch provides organized access for rapid trailside repairs. And if you ride late, there’s a blinker light attachment point and reflective patches for nighttime visibility. Suspension - Atilon foam framesheet allows dynamic body movement while it spreads load across the entire back panel Airscape Backpanel - Mesh covered ridged foam allows maximum ventilation while keeping the load close to the body Biostretch Harness - Mesh covered die cut foam provides an active and contouring fit and ventilation - Soft, breathable spacer mesh contact surfaces Air Mesh Hipbelt - Air Mesh hipbelt for a breathable and ride stabilizing wrap Additional features - Front Stash Pocket - Front zippered stash pocket with heat embossed scratch-free lining safely holds sunglass or phones - Hipbelt Pockets - Dual zippered hipbelt pockets provide secure storage for often needed items - Hydration Compartment - Hydration sleeve with direct access zip offers fast loading. Hydraulics 3.0 Liter LT reservoir included - Stretch Mesh Front Pocket - Front stretch mesh pocket for quickly stashing extra gear - Front Panel Floating Top Pocket - The front panel floating top pocket with a side zippered organizer pocket provides extra volume and organization when needed
Osprey Viper 3
$80.00
When you’re squeezing in a quick ride after work, Osprey’s Viper 3 is the perfect size. The suspension is designed for moving light and fast: A foam framesheet spreads weight across a ventilated mesh backpanel for lightweight comfort. The BioStretch shoulder harness provides a contoured fit and the webbing hipbelt is removable to shave ounces. If you end up carrying extra weight, top compression straps lend extra load stability. Access gear in the main compartment via a zippered front panel. You can slip small items into the harness pocket or stash a layer in the front fabric shove-it pocket for quick access. Bike-friendly features include a Hydraulics LT 2.5 liter reservoir with magnetic bite valve retention, internal bike pump storage loops, and Osprey’s innovative LidLock helmet attachment system. Suspension - Atilon foam framesheet allows dynamic body movement while it spreads load across the entire back panel Airscape Backpanel - Mesh covered ridged foam allows maximum ventilation while keeping the load close to the body Biostretch Harness - Mesh covered die cut foam provides an active and contouring fit and ventilation Webbing Hipbelt - Removable 20mm webbing ride stabilizing hipbelt Additional features: - Upper Side Compression Straps - Dual upper side compression straps help stabilize the load - Front Shove-It Pocket - Front panel shove-it pocket with zippered organization pocket helps gear accessible and systematized - LidLock Helmet Attachment - An elasticized LidLock helmet attachment system provides storage for your helmet - Blinker Light Attachment - The blinker light attachment strap found near the base of the front panel of the pack allows for quick light attachment for high visibility in the dark - Hydration Compartment - Hydration sleeve with direct access zip offers fast loading. Hydraulics 2.5L LT reservoir included - Harness Pocket - Stretch mesh harness pocket provides easy access to energy snacks and other quickly needed items
Polar Bottle Fade Bottles
$9.99 - $15.00
The Polar Bottle Sport is the original insulated water bottle that keeps your water cold more than twice as long. Lightweight, squeezable and easy to clean, the Polar Bottle Sport is the go-to bottle for adventurers around the globe. This bottle comes standard with the Polar Bottle Sport cap.
Polar Bottle Solid Bottles
$10.00 - $15.00
Polar's Insulated Bottles keep liquids cooler, longer so you enjoy crisp, refreshing drinks even at the end of your rides. These excellent bottles are BPA- and chemical-free so every sip tastes great. Plus, they feature an easy-to-clean removable valve, plus a handy and removable carrying loop. This bottle comes standard with the Polar Bottle Sport cap.
Polar Bottle Artist Series
$9.99 - $12.99
The Polar Bottle Sport is the original insulated water bottle that keeps your water cold more than twice as long. Lightweight, squeezable and easy to clean, the Polar Bottle Sport is the go-to bottle for adventurers around the globe. This bottle comes standard with the Polar Bottle Sport cap.
Polar Bottle Insulated Bottle (Pattern Series)
$10.00 - $12.00
Polar's Insulated Bottles keep liquids cooler, longer so you enjoy crisp, refreshing drinks even at the end of your rides. These excellent bottles are BPA- and chemical-free so every sip tastes great. Plus, they feature an easy-to-clean removable valve, plus a handy and removable carrying loop.
Polar Bottle Insulated Bottle (Graphic Series)
$10.99 - $12.00
Polar's Insulated Bottles keep liquids cooler, longer so you enjoy crisp, refreshing drinks even at the end of your rides. These excellent bottles are BPA- and chemical-free so every sip tastes great. Plus, they feature an easy-to-clean removable valve, plus a handy and removable carrying loop.
Polar Bottle Big Bear
$10.00 - $15.00
The Polar Bottle Sport is the original insulated water bottle that keeps your water cold more than twice as long. Lightweight, squeezable and easy to clean, the Polar Bottle Sport is the go-to bottle for adventurers around the globe. This bottle comes standard with the Polar Bottle Sport cap.
Surly Silicone Pint Glass
$16.00
Our Silicone Pint Glass is one such vessel that allows you to keep your colds cold and your hots hot. Plus, it’s virtually indestructible.
Specialized Rib Cage II
$25.00
The Rib Cage II is not only a sleek, lightweight water bottle cage, but it's also been designed to be fast in the wind. Of course, it also performs its primary task of holding tight to bottles dutifully, so you won't be losing bottles when the road gets rough. - SWAT-compatible design allows for storage and tool integration. - Super-low bottle position improves the aerodynamic profile. - Tuned compression design provides a secure bottle retention with easy in-and-out accessibility. - Reinforced composite material improves durability without adding weight. - Sleek, minimalist design with razor-sharp graphics. - Accepts EMT Cage Mount MTB or Road Tool. - Accepts MTB XC Box (when used on compatible frames). - Weight: 33g
Specialized Rib Cage II
$20.00
The Rib Cage II is not only a sleek, lightweight water bottle cage, but it's also been designed to be fast in the wind. Of course, it also performs its primary task of holding tight to bottles dutifully, so you won't be losing bottles when the road gets rough. - SWAT-compatible design allows for storage and tool integration. - Super-low bottle position improves the aerodynamic profile. - Tuned compression design provides a secure bottle retention with easy in-and-out accessibility. - Reinforced composite material improves durability without adding weight. - Sleek, minimalist design with razor-sharp graphics. - Accepts EMT Cage Mount MTB or Road Tool. - Accepts MTB XC Box (when used on compatible frames). - Weight: 33g
Sunlite Alloy Cage
$3.39 - $8.00
Sunlite's Alloy Cage comes in a rainbow of colors to match your bike. It's light, holds fast and looks great.
Specialized Purist Fixy Water Bottle
$11.00
Specialized's Purist Fixy Bottle features an amorphous silicon dioxide coating that's infused into the inner-wall of the bottle. Essentially, this forms a glass-like finish that provides a totally natural, and completely inert, solution to the problem of your drinks staining the bottle or leaving behind any residual aftertaste. This infusion also shields your fresh water from tasting like plastic on very hot days, making it akin to drinking straight from a sparkling clean glass. The silicon dioxide coating is a mere 20 nanometers thick which, for comparison, is less than 5,000 times thinner than a human hair. Meanwhile, the shape of the bottle feels equally perfect both in the hand and in the cage. It comes equipped with a Fixy cap, which is the easiest cap to use on the market. Period. No push or pull of the mouthpiece is required to open and close it. Plus, the integrated Heart Valve provides incredible flow and a leak-proof design. - Purist infusion shields the bottle form odor, stains, and mold to keep your water pure and your bottle clean. - Self-sealing Heart Valve delivers a high rate of flow with a 100% leak-proof design, even when the valve is open. - No push or pull is required to open and close the Heart Valve. - Easy-to-clean mouthpiece - Ergonomic design of cap body provides easy grip. - Made from easy-to-squeeze LDPE material. - Clear viewing strip makes it easy to see the bottle's contents. - BPA-Free plastic is made from 100% FDA food-grade materials, and it's printed with non-solvent base (UV Cured), CPSC-approved ink and materials.
Zipp SL Speed Carbon Bottle Cage
$75.00
Zipp's SL Speed Carbon Bottle Cage features an ultra-light (18g) design engineered for flexibility and strength. Optimized for both side and direct bottle entry the SL Speed cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle.
Specialized Zee Cage II Alloy
$4.32
Specialized's Zee Cage II Alloy boasts a unique side-loading design that works great on small frames and full-suspension bikes that don't have clearance for getting a bottle in and out of a standard cage. Plus, it's made of strong and light aluminum to hold bottles fast.
Specialized S-Works E-Cage 6.0 MTB
$10.00
Specialized's E-Cage 6.0 MTB is constructed from aluminum for minimum weight, maximum durability and excellent bottle-holding power.
Sunlite Bottle Cage Handlebar Mount Adapter
$10.00
• Fits bars: 22.2 to 31.8mm diameter • No-Tool quick-release mount • Anodized finish
XLAB Starter Kit
$93.95
• Complete packaged system containing all essential items for training and Sprint race distances • Includes the key items for training • Includes essentials you need for short triathlons • Supplies your hydration, nutrition, and repair storage needs along with inflation accessories Includes: • TORPEDO SYSTEM 50: Refillable 26 oz aerobar mounted hydration system. No tools required for installation. • STEALTH POCKET 100: All-purpose nutrition & repair top tube storage bag accommodating most bikes • NANOFLATOR: Easy to use inflator, with a twist to inflate function, for controlled inflation • AIR STRIKE CO2 cartridge: One 16 gram CO2 cartridge
Profile Design Axis Karbon Kage
$65.99
Profile's Axis Karbon Kage is kutting edge! Tipping the scales at just 33 grams, this is one of the lightest cages available. And, the carbon’s fine grip prevents bottle launch no matter where you mount the Kage. Plus, it adds a sweet look to your prized ride!
Dimension Adjustable Handlebar Clamp Bottle Cage
$11.99
Clamps onto handlebars with adjustable clamp to provide easy water bottle access.
Topeak Ninja Cage SK
$14.95
A reversible cage can be mounted to easily grab your bottle from either side. It's also ideal for full suspension or smaller sizes frames where bottle access can be challenging. Compatible with Ninja cage QuickClick mounting system with a simple twist for the ultimate combination of accessories. - Material: Engineering grade polymer - Cage Outer Diameter: Fits standard water bottles - Compatibility: Ninja cage accessories - Added Features: Includes Ninja QuickClick Mount - Reversible Design - Size: 14.7 x 8.3 x 7.3cm / 5.8 x 3.3 x 2.9-inches - Weight: 40g / 1.41oz
MSW Side-Entry Water Bottle Cage
$10.99
This Side-Entry water bottle cage allows for easy bottle access, so you can ride safely while keeping thirst under control. - Helpful for small frames and frame bag use - Left- or right-side access - Includes steel mounting bolts
Elite Crystal Ombra
$12.99 - $14.49
The Elite Crystal Ombra bottle's new design improves the bottle cage's grip on the bottle - Transparent to monitor liquid level - High flow membrane valve technology - High liquid flow - BPA Free
Profile Design Aerodrink System
$25.00
With Profile's Aerodrink System you can stay in your aero position and stay hydrated. This durable, injection-molded 32-ounce bottle includes an extended straw for easy access, and its mesh plug is great for on-the-go refills. The Aerodrink also slips easily into Profile's Airstryke and Century aero bars (sold separately).
XLAB Mezzo Cage Pod
$10.95
XLAB's Mezzo Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 750ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.
Kinetic Twenty20 Bottle Cage
$15.00
The Kinetic Twenty20 Bottle Cage ergonomically improves the simple act of grabbing a drink on the bike. A natural arm motion removes and replaces a bottle at an angle of approximately 20 degrees off-center. The Twenty20 Bottle Cage can be mounted on a bike frame at a 20-degree offset left or right, allowing bottle insertion into the center of the cage, rather than in from the side.
MSW All-Around Water Bottle Cage
$21.99
All-Around rotating bottle cage rotates to allow customization of bottle access. - Great for small or irregularly shaped frames. - Adjustable for custom positioning - Easy bottle access on small or irregularly shaped frames - Durable, lightweight aluminum - Easy to slide bottles in and out - Includes steel mounting bolts
Page 1 of 7 Next page