The Long Haul Trucker fork is designed to mount racks and fenders and to haul stuff. The fork’s new crown provides ample clearance for 26 x 2.1 tires and sports threaded eyelets in four locations (dual dropout, midblade and fork crown) to provide more options for mounting stuff, from racks to whatever. Options galore. Curved blades, CroMoly steel. 1-1/8-inch threadless steer tube. - Axle-to-crown: 26" = 376mm - Offset: 45mm - Steerer: 26" (42–54cm frames) = 300mm; 26" (56–62cm frames) = 400mm - Tire Clearance: 26 x 2.1" - Weight: 26" = 2.1 lb (0.97kg) uncut
Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.
• Caliper brake mounts • 385mm axle-to-crown • Chromoly construction • 1-inch steerer diameter • Threaded fork
The Firestarter Carbon Fork is Salsa's high-end, rigid bikepacking fork. This sure-tracking platform features a carbon structure and 15mm thru-axle design, and the Three-Pack mounts on the forward portion of each leg allow use of Salsa Anything Cages or extra water bottle cages. - Axle to Crown Length: 483 mm - Brake Mount (Fork): Post Mount 160 - Crown Race: 40 - Front Axle: 15mm Thru x 100mm - Wheel Mount Center Offset (mm): 0 - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Steerer Tube Length (mm): 260 mm - Weight: 620 g - Wheel Size: 29er, 29+, 700c - Rotor Size (Fork): 200 - Maximum Tire Clearance (Fork): 3
Salsa Firestarter Fork - Mid-blade and dropout rack mounts - Anything Cage mounts on front of fork - Axle to Crown Length: 483 mm - Brake Mount (Fork): IS Disc Brake 160 - Crown Race: 30 - Front Axle: 9mm x 100mm - Material: Steel - Wheel Mount Center Offset (mm): 0 - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Straight - Steerer Tube Length (mm): 300 mm - Weight: 1190 g - Wheel Size: 27.5+ , 29" , 700c - Maximum Tire Clearance (Fork): 3
The Ohlins RXF 36 Coil fork uses the same chassis of the RXF 36 fork, keeping the same stiffness, room for bigger tires, and proprietary TTX damping technology, but instead uses high quality coil springs that are easily swapped for various rider weights and it utilizes. This provides a ride with great feel throughout the travel—from small bumps to big hits. - Features a coil spring, with multiple spring rates in 0.9N/mm / 5lb/inch increments, allowing for a plush, linear suspension feel, tuned specific for the riders weight. - TTX (Twin Tube) damping enables separated oil flow, so the fork will always provide the perfect degree of pressure. This way, it stays smooth and high in the travel without compromising bump absorption, traction, or stability. - A tapered alloy steerer and two piece crown ensure high stiffness and tire control with less chassis flex and chassis hysteresis. 36mm stanchions with 51mm offset for party time on the trail. - 150 and 160mm travel options available. - 110 x 15mm spacing makes it compatible with most 29-inch setups.
Dimension Road Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing. - Forged dropouts with eyelets, welded unicrown construction - Designed for short-reach caliper brakes - 25 x 14mm tapered oval blades - Axle to Crown Length: 374mm - Brake Mount (Fork): Short Reach Caliper (39mm-49mm) - Color: Black - Crown Race: 30 - Defined Color: Black - Front Axle: 10mm x 100mm - Material: Steel - Offset: 50mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length (mm): 300 - Steerer Type: Straight - Weight: 773g (1-inch); 780g (1 1/8-inch) - Wheel Size: 700c
A day of slicing through sweet ribbons of singletrack on a bike sporting a RockShox 30 Silver will leave you smiling all the way to the bank. Race-proven plushness and ease of setup means more time on the trail and less time tinkering. Lightweight and packed full of legendary RockShox technology, the 30 Silver is sure to boost the level of your ride without boosting your wallet in the process. - TurnKey damper - Crown Race: 30mm - Steerer Tube Length: 265mm - Positive Spring: Coil - Negative Spring: Coil - External Adjustments: Rebound Damping, Low Speed Compression Damping - Maximum Tire Width: 62mm - Maximum tire size: 26 x 2.4"
$349.00 - $369.00
Light (actually, very light)? Check. Easy to set up? Check. RockShox ride quality? Check. Too good to be true? Not if you are referring to the RockShox 30 Gold, featuring Motion Control damping. - Motion Control damping featuring low speed compression adjustment to lockout - Fast Black aluminum upper tubes - Solo Air spring
The RockShox Recon sets the benchmark for value-based performance. Recon represents a perfect partnership between Reba’s lower legs and bombproof RockShox steel Fast Black upper tubes. Adopting the Reba chassis allowed the design team to employ shorter upper tubes, which means Recon just went on a serious weight-loss program. The Motion Control damper features low speed compression adjustment to lockout. - NEW "E-MTB" decal for Diffusion Black options - Fast Black steel upper tube finish - Solo Air spring - Right OneLoc remote included
Surly's Moonlander Fork has clearance for a 26 x 4.7-inch wide tire. It accepts specialty front hubs with a rear disc offset or 135mm rear hubs. It takes a front disc-brake adapter so you can run any brakes that come in a traditional front/rear set without having to break up a set. This fork features large-diameter, thin-wall chromoly blades that taper for a smooth and supple ride. And, it's got standard and low-rider rack mounts and comes in a tough powdercoat finish because it's awesome.
Designed with the Surly Pack Rat frame, this fork is built with front cargo carrying in mind. It’s made from 4130 CroMoly steel and features mid-blade eyelets for mounting a Surly 8- or 24-pack rack (among others). This lugged and brazed fork also includes fender eyelets at the dropouts, internal routing for generator hubs, and cantilever brake pivots. - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets for mounting a front rack - Fender eyelets at the dropout - Internal routing for generator hubs - Cantilever/Linear Pull brake mounts - 9mm x 100mm quick-release dropouts - Max tire clearance: 26 x 2.0"
This fork will accept 26-inch tires up to 3.8-inch with plenty of clearance, even using rims as wide as 82mm. It requires a wheel built offset to match the Pugsly frame (17.5mm). Since the hub spacing is 135mm (mountain rear) this is a useful feature, especially in remote places and extreme temperatures or conditions. Should your freehub seize due to cold, invasive grit or other reasons, you can swap wheels and keep moving. Internally butted tapered straight legs. 51mm I.S. disc brake caliper mount uses standard front adapter. Chromoly. - Axle-To-Crown: 447mm - Offset: 43mm - Steerer: 260mm 1-1/8" straight - Tire Clearance: 26 x 3.8" (on rims up to 82mm wide)
Surly's Wednesday fork is made of the same 4130 CroMoly steel as its frame counterpart. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It features many accessory barnacles (or braze-ons if you prefer to speak in “official" terms) like barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs. - Axle-to-crown: 468mm - Offset: 47mm - Steerer: 260mm, 1-1/8-inch straight - Tire Clearance: 26 x 5.25-inch - Weight: 1262g
700c Hybrid fork with Cantilever Mounts - Forged dropouts with eyelets, straight-gauge oval-tapered blades - Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing - Welded unicrown construction - Clearance for 50mm wide fenders (1 1/8-inch) - Axle to Crown Length: 403mm (1 1/8-inch); 412mm (1 1/8-inch SC); 403mm (1-inch) - Brake Mount (Fork): Canti Studs - Color: Black - Crown Race: 30 (1 1/8-inch, 1 1/8-inch SC); 26 (1-inch) - Front Axle: 10mm x 100mm - Material: Steel - Offset: 50 mm - S.H.I.S. Stem Clamp Diameter: 28.6 (1 1/8-inch, 1 1/8-inch SC); 25.4 (1-inch) - Steerer Tube Length: 300mm (1 1/8-inch); 260mm (1 1/8-inch SC); 300mm (1-inch) - Steerer Type: Straight - Weight: 975g (1 1/8-inch); 1105g (1 1/8-inch SC); 963g (1-inch) - Wheel Size: 700c
- Compression loader damper unit with bladder for amazing small bump compliance and no stiction off the top - Externally adjustable rebound and high/low speed compression - Shock body cooling fins keep things running cool - Spring and mounting hardware not included, must be purchased separately - Adjustments: high speed compression, low speed compression, rebound, spring preload - 425 grams
$17.00 - $41.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
This is Pike DJ. It’s a cousin to the award-winning Pike, which makes it look a lot like a trail fork. And you can call it a trail fork if you want — especially if your trails are named "Flip-whip," "Truckdriver" or "Cash Roll." Pike DJ is built on a stout 35mm chassis, and includes a custom tuned Charger damper and specific Solo Air system designed for like a metric ton of bottom-out progression, because your trails eventually require some landings. - Award-winning Pike Chassis - Custom-tuned Charger damper - Charger Damper with specific Dirt Jumping/Slopestyle tune (extra-firm compression) - Specific Solo Air top cap for extra bottom out progression (tunable with Bottomless Tokens) - Updated graphic package to complement the RockShox lineup
Here it is, you asked for it, you got it! We’ve created a segmented mountain bike fork to pair with our Electric Queen. Even better, we’re offering it painted-to-match for Lime/Lavender/Black SplatterQueens. Now you can make your EQ over into the fully rigid bicycle of your dreams. - 4130 steel butted and tapered fork blades - Clearance for 27.5 x 3.0" or 29 x 2.25" tires - 15x110mm Boost spacing - E.D. coated for durability and rust prevention - 1-1/8" Straight steerer tube - Axle to Crown Length: 485 mm - Brake Mount (Fork): IS Disc Brake 160 - Crown Race: 30 - Offset: 51 mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length (mm): 350mm - Thru-Axle included
All-City's Space Horse fork is ready to be mounted on any bike you want to class up or add a front rack to. The blades feature a classic rando bend radius, double eyelets on the lugged dropouts, and mid-blade mounts which allow the use of a variety of front rack styles. The entire fork is E.D. dipped for rust proofing, with a nice black powdercoat over everything. - Material: Full 4130 high quality chromoly double-butted tapered fork blades, lugged crown, and matching fork ends - Axle to Crown Length: 395mm - Offset: 52mm - Steerer Tube Length: 300mm - Tire Clearance: 42c - Brake Mount (Fork): canti studs - Spacing: 100mm
$387.00 - $427.00
ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness. When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.
Whisky's No.9 RD+ is an all-road fork designed for versatility with abundant tire clearance, up to 700x38c or 650x47c. Hidden and removable fender mounts make this fork all season capable. - 12mm Thru Axle - Flat Mount Disc Brake - Tapered Steerer Tube - 700x38c/650x47c clearance
$419.00 - $439.00
Light (actually, very light)? Check. Easy to set up? Check. RockShox ride quality? Check. Too good to be true? Not if you are referring to the RockShox 30 Gold, featuring Motion Control damping. - Motion Control damping featuring low speed compression adjustment to lockout - Fast Black aluminum upper tubes - Solo Air spring - Includes remote
Whisky's No.9 CX Flat Mount is the updated version of the original No.9 CX fork. Building on the precise tracking and braking performance of their original, they've pushed performance even further with this fork. Lighter weight, updated fitment and clean lines make for a supremely capable fork. - 12mm Thru Axle - Flat Mount Disc Brake - Tapered Steerer Tube - 700x42c/650x47c clearance - Hidden, Removable Fender Mounts
Ever wished you could lock out your front and rear RockShox suspension instantly and simultaneously, to get the extra edge for that final sprint to the finish or the grueling tarmac climb to the top of your favorite trail? Here comes RockShox's XLoc Full Sprint, which allows you to lock your SID or Revelation XX fork and your Monarch XX rear shock (all sold separately) with the simple push of your thumb. XLoc is a completely sealed, dependable lockout control, which works with a single thumb press: push to unlock, push again to lock. It’s that easy. Elite XC racers use their XLoc as often as their shifter, to gain that extra edge when sprinting out of corners or on smooth bits of the course. Now imagine being able to do the same with your fork and shock: that’s XLoc Full Sprint. Includes Motion Control X DNA comp damper, rear shock hydraulic hose, and bleed syringes.
Dimension Road Forks are not intended for aggressive riding, stunt riding or road racing. - Forged dropouts with eyelets, welded unicrown construction - Designed for short-reach caliper brakes - 25 x 14mm tapered oval blades - Axle to Crown Length: 374mm - Brake Mount (Fork): Short Reach Caliper (39mm-49mm) - Crown Race: 26 - Front Axle: 10mm x 100mm - Material: Steel - Offset: 50mm - S.H.I.S. Stem Clamp Diameter: 25.4-24 tpi Quill - Steerer Tube Length (mm): 170 - Steerer Type: Straight - Weight: 692g - Wheel Size: 700c
$134.99 - $154.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. Their new R-Series forks continue this tradition. FEATURES - Fully redesigned. - Laboratory tested and team proven. - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance. - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race. - New, optimized, 4mm dropout shape for grind and peg clearance. - Updated 7075-T6 pre-load bolt - Proven 41-Thermal® processed 4130 chromoly - Legendary lifetime replacement warranty SPECS - 32mm traditional offset - 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
$223.00 - $255.00
• Upgrade from crown adjust to remote adjust • Includes two bleed syringes, torx wrench, Motion Control XDNA compression damper, XLoc remote lever and hose • Available for Revelation and SID
3T's Luteus Team is an all-carbon cyclocross fork designed for use with disc brakes. It features include a tapered steerer and aluminum-faced fork ends for precise handling and simple wheel changes. It supports brake calipers for use with standard 160mm brake rotors. The left fork blade is reinforced at the brake mounting pillars to compensate for the stresses imparted by disc braking. On its outer face, there is a recessed channel with two integrated fixing points for tidy brake cable/hose management. Plus, the fork ends face forwards and have aluminum inserts to better resist the lateral stresses transmitted through the hub by rough terrain.
The ultimate carbon fiber disc brake compatible cyclocross fork. ENVE created this fork because we love cyclocross racing and gravel road adventures. Like all ENVE products, this fork was developed from a desire to improve the ride experience. In this case they knew that a thru-axle would make for a better tracking and braking front end. A quiet ride is also a priority, so the addition of a thru-axle means less rotor rub and caliper adjustments. Because the majority of time isn’t spent racing under UCI rule, they made this fork compatible with high volume tires — you can run up to a 45mm (1.9-inch) tire with a 700c wheel and up to a 50mm (2.0-inch) tire if you are running 650B. Using our proprietary molding methods, the thru axle disc cyclocross fork offers the ultimate in cyclocross and gravel road bike performance. From steerer tube to dropout the forks are constructed in one piece, which equates to a very efficient structure that yields a lightweight and highly durable product. The front thru-axle diameter is optimized for road and cyclocross disc applications at 12mm. Whether you are racing on the World Cup cyclocross circuit or riding gravel events like the Crusher or Dirty Kanza, the ENVE thru-axle cyclocross disc fork is designed to perform in these environments. - 1-1/8 – 1.5-inch tapered steerer
Page 1 of 3 Next page