Lighting

CatEye's EL135 Headlight and LD130 Taillight Combo is a great setup for nighttime visibility and safety. The compact EL135 headlight uses 3 super-bright LEDs for a wide beam that lets you see more of the road. With 2 AA batteries, it provides up to 80 hours of run time on steady mode and up to 320 hours on flash mode. CatEye's LD130 Taillight features 3 ultra-bright LEDs for excellent visibility, has flashing and steady modes, and runs for up to 150 hours on the included 2 AAA batteries. Plus, this kit includes no-tools universal mounts for each light for easy installation.

Portland Design Works' Danger Zone Taillight will enhance your visibility like the beacon on a jetfighter with two 1/2-watt LEDs. It boasts three modes and includes seatpost, seatstay,. and backpack mounts, too. - ?Two 0.5 watt red LEDs by Nichia Brand - Three modes: zZz, a-HA!, and Rock Steady - Up to 50 hours run time on 2xAAA batteries (included) - Includes Stayputnik seatpost mount - Weatherproof exterior for all season riding - Weight: 57g (2oz)

Light & Motion's Urban 500 lights up your daily commute. It's light, bright, and rugged for urban and off-road adventures alike. Featuring: • 500 Lumen output certified to the FL-1 Standard. • Engineered with top of the line CREE LED and enhanced firmware. • It is the only light in its class with an accurate 4 level battery charge status indicator so you know if you have the juice to get home. • Custom engineered reflector optimizes the light to provide the most efficient and effective distribution of light for cycling. • Amber Side lighting for a full 180 degrees of visibility. • Designed to be mounted on your handlebar or helmet (tool-free system). • Lightweight aluminum body with integrated heat sink fins. • MicroUSB Rechargeable (fully charges in 5 hours). • Low battery warning and auto shut-off to prevent damage. • Multiple power settings. Runtime/Lumens • High 1:30/500 • Med 3:00/225 • Low 6:00/115 • Pulse 12:00/115

Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.

Planet Bike's Beamer 1 & Blinky 3 Light Set will keep you safe when it's dark. For excellent visibility the Beamer headlight provides a focused LED beam and the Blinky taillight boasts 3 red LEDs. There are also quick-release mounts for easy on/off.

Vya Smart Lights are a revolutionary concept incorporating technology to provide effortless safety in an ultra-compact, convenient design. Auto-on sensors, waterproof bio-renewable construction, and innovative safety features create the most technically advanced light available for cyclists. The Vya Commuter Combo is the perfect solution for riders that pedal in high traffic areas and want the added assurance of SafePulse visibility day and night. Features - 150 Lumen Headlight & 50 Lumen Taillight with variable SafePulse beam pattern optimized for maximum visibility day and night - Smart sensor technology senses motion and automatically turns lights on when inserted into mount; Auto-off when bike is parked removed from mount - SafePulse beam pattern scientifically designed to enhance a passing driver’s ability to judge the cyclist’s distance and direction of travel without the risks associated with flashing lights - Beam patterns optimized to give a wide swath of light that can be seen clearly from the rear and side ideal for city riding - Extra long run-time perfect for riders who do not want to charge lights on a daily basis, Low battery status is indicated by rapidly flashing sidelights - USB Mount Receptor allows lights to be securely mounted or removed from bike in seconds with a simple, secure 1/4 turn lock; lights will not turn on when removed from mount and slipped into a pocket or bag - Easy direct USB charging without cables fully charges in 2 hours - Made with bio-renewable material waterproof to 1 meter (when inserted in mount) for all-conditions reliability (IP67 Rated) Headlight Specifications - Lumens: 50 (high), 50 (SafePulse) - Runtime: 480 min (high), 480 min (SafePulse) - Beam Angle: 30° (flood) - Charge Time: 120 min

Light & Motion's Taz 1200 is the all-in-one handlebar light that outshines many car headlamps and fits in the palm of your hand. Perfect for the most technical singletrack or critical commute where Lumen output is a priority. Featuring: - 1200 Lumen output certified to the FL-1 Standard - Engineered with a 3 LED array using the highest level CREE LEDs. - Sealed, waterproof design – up to 1m. - Custom engineered reflector/optics diffuses the bottom LED to cover an ultra-wide spread down in front and focuses the top two LEDs to penetrate the darkness with a far-reaching beam, without wasting any light. - Beam pattern was engineered to maximize visibility at high velocity with ample beam distance lead-time and the widest beam angle for the sharpest turns. - Side lighting to maximize visibility on roadways with a dedicated button to toggle the side lights on/off. - Secondary Race Mode simplifies your settings to switch between high power with 2 hours run time and low power with 4 hours. - Accurate battery status indication illuminates the power button with three different colors to clearly display remaining battery life with 4 levels. - Universal tool-free mounting system. - Ultralight aluminum heat sink with tapered fin design. - Micro-USB Rechargeable - Charge rate indicator illuminates the power button with three colors to display speed of charge. - Low battery warning and auto shut-off to prevent damage. - Multiple power settings with cruise and secondary race mode Run time/Lumens: - High 1:30 / 1200 - Med 3:00 / 600 - Low 6:00 / 300 - Pulse 9:00 / 300 - Flash 18:00 / 300 - Race High 2:00 / 1000 - Race Low 4:00 / 450

Planet Bike's Superflash/Blaze Combo Light Set is a commuter's dream that maximizes your visibility on dark, moonless nights. The Blaze boasts a Nichia half-watt white LED with a brilliant beam specifically designed not only to be seen, but also to let you see where you're going. The Super Flash aims 2 LEDs plus a half-watt Blaze LED for light that can be seen for up to 1 mile! They both feature flashing and steady modes, include batteries and deliver run times of up to 100 hours.

Packing two premium LEDs for class-leading light output, this light uses a super high capacity lithium-ion battery, so all those lumens come with long runtimes. A clever user interface, meanwhile, gives you four extra modes for secondary uses, but it also let's you focus on the three steady modes that matter. Still putting a flashlight on your handlebar? See what you've been missing with the new Flux 1200 headlight. - Sculpted double-beam pattern puts light where you need it and maximizes every lumen. - Latest CREE XP-L High Intensity LEDs combines XM-L level of output in a non-domed 3.5mm package for maximum lumens with better beam pattern control. - Quick-release bar mount works on 22.2, 25.4, and 31.8mm bars. - Mounting system centers light in front, above, or below the stem with a long reach to work around most computer mounts and shifter/brake cables. - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - USB rechargeable 3400mAh Li-ion internal battery. - 1200-/600-/300-lumen output in three main steady modes. - 1:15-/2:30-/5:00-hour runtimes in three main steady modes. - Press-and-hold to turn off. - Long press-and-hold to enter secondary modes: daytime flash, steady wide + narrow flash, camping flashlight, and emergency low. - Extra-long press-and-hold to lockout light for travelling. - Depending on mode, up to an additional three hours of super-low output are available when listed runtimes expire. Trust us, someday you'll need this. - 90% fast charge in 1.5 hours with full charge in 3 hours. - Compatible helmet mount sold separately (49119-9220).

Planet Bike's Superflash USB uses super bright LED's for visibility up to 1 mile. The ultra-compact case is weatherproof, light and durable, and features a soft-touch power switch. A USB-rechargeable lithium ion battery provides up to 36 hours of run time.

Light & Motion's Vis 180 Micro rear bike light offers both visibility and convenience with its unique compact design. It combines high-power leds, custom reflectors and a rechargeable lithium battery in a micro-sized package for total convenience and unmatched visibility on the road or on the trail. Featuring: • 25 Lumen output certified to the FL-1 Standard • Engineered with the highest level CREE LED and enhanced firmware. • Dual LED array to maximize visibility. Accurate battery status indicator with 4 status levels. • Custom engineered reflectors and optical solutions optimize the light to distribute red and amber light a full 180 degrees. • Secondary LED spreads amber light for 180 degrees of visibility. • Simple ratchet in/out adjustability • Simple tool-free mounting system - easy to take on and off. • Integrated clip for attaching to backpack or messenger bag • Bike rack mount available and sold separately • MicroUSB Rechargeable (Fully charges in 2.5 hours) • Low battery warning and auto shut-off to prevent damage • Multiple power settings. Run time/Lumens: • HiPulse: 6:00 / 25 • LoPulse: 12:00 / 13 • Solid: 4:00 / 25 • LoPulse: 20:00 / 13

Compact, durable cycling light with a machined aluminum body. It features built in cooling fins and cutouts for side visibility. Its single LED design provides up to an impressive 500 lumens of output and eight output modes—including a Daytime Flash mode. Runtime has increased by 2.5 hours for up to 20 hours. Charging is simple with an integrated cable-free USB stick. It securely straps to a variety of handlebar shapes and sizes. Specs - Max Lumens: 500 - Weight: 84g - Max Runtime: 20 hours - Recharge Time: 2:30 hours

High-performance e-bike cycling light. Durable, heat-dissipating CNC machined aluminum construction. Two ultrahigh-output LEDs deliver up to 1,000 lumens. Enhanced MOR (Maximum Optical Reflection) lens with built-in side visibility. Intelligent Auto Day/Night dim mode. E-bike compatible 6 - 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes a Direct X-Lock and aluminum CNC fork mount and 140cm long power cable. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. *Direct X-Lock Mounting System not compatible with all stems. Please see installation manual for stem compatibility. Specs - Max Lumens: 1000 - Dimensions: 44.5 x 41 x 31mm / 1.75 x 1.61 x 1.22"

Compact, aero-post-compatible safety light with two bright LEDs. It features a super-lightweight, yet durable co-molded construction that is IPX7 (waterproof) rated. NEW -- Up to 20 hours of runtime (seven hour increase) with highly improved optics. Its Wide Angle Lens offers up to 270° of visibility. The KTV Drive rear provides up to 10 lumens and five output/flash modes. And it features an integrated USB stick for convenient cable-free recharging. Specs - Max Lumens: 10 - Weight: 54g - Max Runtime: 20 hours - Recharge Time: 3 hours

Start a Party! When the sun goes down, stay visible - the Monkey Light M232R turns your evening bike ride into an instant party. The MonkeyFX system creates thousands of amazing patterns in your spinning bicycle wheel. With cutting edge digital light art, the M232R is sure to get you noticed at night. The Monkey Light provides great front, rear and side visibility at any speed. It creates full color patterns on your spinning bike wheel at 10 to 40 mph (15 to 65 km/h). The 8-bit themes are instantly customizable - with on-board buttons you can choose the themes and colors to fit any situation. An included USB-powered lithium battery makes recharging convenient. The M232R is easy to mount on the spokes of nearly any bike - Road, City, Cruiser, Mountain and BMX bikes. The light is perfect for daily commuters, urban cyclists, casual evening riders - anytime you want to be visible What's included: - 1 Monkey Light M232R Bike Light - 1 Hub-mounted USB-rechargeable lithium battery (keeps wheel balanced) - 1 stainless steel anti-theft strap - 2 rubber mounting pads - 8 plastic mounting straps - Instruction sheet with 21 languages - 2 year limited warranty Specifications - 200 Lumen brightness - Power: USB-rechargeable lithium battery - Battery life: up to 12 hours - Fit: bicycle wheels 20-inch or larger. - Riding speed: up to 40 mph (65 km/h). Patterns visible above 8-10mph (12-15km/h). - Visibility: front and side visibility when mounted on front wheel. rear and side visibility when mounted on rear wheel. - Mounting: straps to spokes with vibration-proof 3-point mount. - Rugged IP67 construction designed for daily use in all weather conditions - 32 full color LEDs (16 on each side) - Battery made in China. Light made in USA

Optimize your comfort and riding position on the Turbo Vado with this sleek stem. It's made from lightweight and durable 6061 aluminum, and it features both an integrated display and light mount. This way, you're able to dial in your fit without losing any of the readily accessible functionality or illumination that you love from the Vado.

- Modes include High Steady, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 26 hours - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Side Illumination ports allow cyclists to be seen when riding across traffic lanes

The All New NiteRider Lumina Dual 1800 represents the next evolution of our best-selling Lumina headlight into a dual LED set-up that produces a far-reaching beam pattern with extensive peripheral illumination; making it the ideal choice for any riding situation or terrain. The Dual emits an amazing 1800 lumens while in Boost Mode, making it one of the brightest self-contained bicycle lights available today. Simply double tap the power button to set the light to Boost Mode. When in Boost Mode, the power button will illuminate red and blue to notify the user at a glance. The Dual is also equipped with side lighting to increase your visibility day or night. Tested, meeting an IP64 rating; The Dual 1800 is designed to be used in a variety of riding conditions because of its high resistance to water and dust. Its high-strength Dupont Fiberglass reinforced nylon body casing and aluminum heat sink are engineered for extreme resistance to cracking and abrasion. - All New Collimator Lens, distributes a smooth widespread beam pattern - Side lighting for increased visibility day or night - Long lasting 20 hour runtime at 100 lumens in Walk Mode - 5 Light Levels plus 2 Daylight Flash Modes - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Helmet mountable (Helmet Mount sold separately) - Fast 3 hour charge via the included AC power charging adapter - Low battery indicator - Extend your ride time, 6 hour runtime at 350 lumens in Low Mode - Boost Mode indicator, power button will light up red and blue - Boost Mode, double tap power button to unleash maximum LED output at 1800 lumens! - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY - The Lumina Dual 1800 is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - Dual LED Head Light - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - AC Power Charging Adapter

The NiteRider Lumina 1200 Boost provides enough light that it can be used in just about all riding conditions, whether it be on the road, on your favorite mountain biking trail, or hand-held in Walk Mode. Specifically designed to meet the needs of riders in all cycling categories, the Lumina 1200 Boost features the Boost Mode light setting. Simply double click the power button, giving you the option to operate your light at maximum light output! And utilizing a CREE LED at 6000k, means you’ll get what most consider to be the best LEDs available on the market today. These high performance LEDs are extremely reliable, with no filament to break or burn out. With the all new custom engineered collimator optics, the Lumina 1200 Boost projects a beam pattern that provides a generous widespread and even beam pattern of 1200 brilliant lumens! The high-strength head light body casing is comprised of lightweight aluminum and Dupont Fiberglass reinforced nylon that is highly durable. The NiteRider Solas 250 uses two powerful LEDs to produce an amazing 250 lumens of light output. It features 4 modes (2 flash / 2 steady) and is USB rechargeable. We’ve implemented what we call “Group Ride Mode” for cyclists who want to stay visible but not distract others in the pack. LUMINA 1200 BOOST - All New Collimator Lens, distributes a generous even widespread beam pattern - Boost Mode, double tap power button to unleash maximum LED output at 1200 lumens! - 5 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Perfect for helmet mounting (Helmet Mount sold separately) - IntelliCharge – Reduce charge time in half! - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. SOLAS 250 - Daylight Visible Flash (DVF) - 250 lumen super bright tail light - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - Convenient USB rechargeable - Super bright daytime flash mode - Be Seen by cars = Be Safe - FL1 Standard IP64, dust and water-resistant WARRANTY - The Lumina 1200 Boost and Solas 250 are both backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LUMINA 1200 BOOST - LED Light Head - Internal Li-Ion Battery - Handlebar Clamp Mount (Fits up to 35mm) - USB Charging Cable SOLAS 250 - LED Tail Light - Seatpost Mount - USB Cable

The NiteRider Lumina OLED 1200 Boost is an innovative bike light that removes the guesswork related to battery life, allowing you to plan your next ride safely with complete confidence, day or night. The OLED multifunctional digital display screen delivers precise battery run times as a percentage and actual time for the Lumina OLED's 9 lighting levels. The Lumina OLED 1200 Boost features a custom engineered collimator sense, producing a generous widespread beam pattern. With Boost Mode providing a stunning 1200 lumens of maximum light output, this makes the Lumina OLED highly capable for use when navigating through diverse riding conditions. - New Collimator Lens, distributes a generous even widespread beam - Boost Mode! Unleash maximum LED output - 5 Light Levels plus 4 Daylight Flash Modes - CREE LED at 6000k - Multifunctional OLED screen provides detailed operational information - FL1 Standard IP64, water resistant - Intellicharge – Reduce charge time in half! - Backlit buttons for easy to use interface in any lighting condition - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Convenient USB rechargeable WARRANTY - The Lumina OLED 1200 Boost is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head with OLED Display - Internal Li-Ion Battery - Handlebar Mount fit up to 35mm - USB Charging Cable

The Vya Pro Headlight give commuters innovative day/night visibility in a platform that be installed/removed from the bike in seconds. Sensing ambient light, the smart headlight knows to pulse in the daytime but remain steady at night – automatically adjusting to the safest riding mode possible. Auto-on/off sensors – like all Vya lights – automatically activate the light when the ride is started and turns itself off after the ride, with a delay built in for stoplights. The simple convenience is a feature riders love, eliminating the need to turn on/off lights. A scientifically designed SafePulse beam pattern for daytime riding not only gets noticed from motorists, but allows the driver to accurately judge distance from the rider and their direction of travel – a safety feature not possible with strobing lights. Attaching Vya is effortless with a simple clockwise 1/4 turn into the mount locking the light in place and activating the auto-on feature. When it comes time to recharge, remove Vya from the mount in seconds and insert the integrated USB paddle directly into a computer or USB power outlet – no cables keeps recharging simple and efficient. The next evolution in bike lighting, Vya Smart Lights are unmatched for their ultra-compact engineering and effortless safety. Features - 200 Lumen Output (250 in Daytime SafePulse mode)  certified to the FL-1 Standard with high powered premium CREE LED - Ambient light sensors detects automatically adjust mode based on the most safe beam pattern for riding: SafePulse in the daytime and steady at night - Smart technology senses motion and automatically turns Vya on when inserted into mount and will remain on, even when a rider pauses at stoplights - Auto-off when bike is parked or light is removed from mount to prevent the dreaded ‘dead bike light’ when it comes time for the next ride - SafePulse beam pattern scientifically designed to enhance a driver’s ability to judge the cyclist’s distance and direction of travel without the risks associated with flashing lights - Horizontal design with custom optic gives a powerful, concentrated burst of light to be recognizable over 2KM away in daylight - 6 hour runtime during the day (SafePulse) and 2 hours at night (solid mode) ideal for day/night commuting - Versatile mounting design can be secured to a range of handlebars, optional GoPro mount interface for unlimited mounting options - USB Mount Receptor allows light to be securely mounted or removed from bike in seconds with a simple, secure 1/4 turn lock; light will not turn on when removed from mount - Direct USB charging without cables fully charges in 2 hours - Made with bio-renewable material waterproof to 1 meter (when inserted in mount) for all-conditions reliability (IP67 Rated) Specifications - Lumens: 200 (high), 250 (SafePulse) - Runtime: 120 min (high), 360 min (SafePulse) - Beam Angle: 20° (flood) - Charge Time: 120 min

The future of cycling taillights is here. Vya is a game-changing design, blending powerful output with revolutionary smart features. The piercing 50 lumen output is easily visible over a distance of 1km, even in bright daylight. What separates Vya from traditional taillights are smart auto-on/off sensors – start riding and the light turns on automatically and will shut itself off after the ride, with a delay built in for stoplights. The scientifically designed SafePulse beam pattern not only gets noticed from motorists, but allows the driver to accurately judge distance from the rider and their direction of travel – a safety feature not possible with strobing lights. Attaching Vya is effortless with a simple clockwise 1/4 turn into the mount locking the light in place and activating the auto-on feature. When it comes time to recharge, remove Vya from the mount in seconds and insert the integrated USB paddle directly into a computer or USB power outlet – no cables keeps recharging simple and convenient. The next evolution in bike safety, Vya takes powerful safety lighting and keeps the rider safe so they can focus on the road ahead. Features - 50 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Smart sensor technology senses motion and automatically turns Vya on when inserted into mount and will remain on, even when a rider pauses at stoplights - Auto-off when bike is parked or light is removed from mount to prevent the dreaded ‘dead bike light’ when it comes time for the next ride - SafePulse beam pattern scientifically designed to enhance a passing driver’s ability to judge the cyclist’s distance and direction of travel without the risks associated with flashing lights - Beam pattern optimized to give a wide red swath of light that can be seen clearly from the rear and side ideal for city riding - An impressive 8 hour runtime allows Vya to be used on multiple rides before needing a recharge, low battery status is indicated by rapidly flashing sidelights - Ultra-compact mount with durable rubber strap designed to be compatible with various size seat posts and can even be attached to seat stays - USB Mount Receptor allows light to be securely mounted or removed from bike in seconds with a simple, secure 1/4 turn lock; light will not turn on when removed from mount - Direct USB charging without cables fully charges in 2 hours - Made with bio-renewable material waterproof to 1 meter (when inserted in mount) for all-conditions reliability (IP67 Rated) Specifications - Lumens: 50 (SafePulse) - Runtime: 480 min (SafePulse) - Beam Angle: 30° (flood) - Charge Time: 120 min

Bike safety reinvented, Vya Pro Smart Lights provide an uncompromising powerful SafePulse beam with convenience commuters love. Smart auto-on/off sensors are a true game changer – start riding and the light turns on automatically and will shut itself off after the ride, with a delay built in to remain on at stoplights. Whereas Vya taillights will always pulse for effective rear visibility, the smart headlight senses ambient light and knows to pulse in the daytime but remain steady at night – automatically adjusting to the safest riding mode possible. Attaching Vya is effortless with a simple clockwise 1/4 turn into the mount locking the light in place and activating the auto-on feature. When it comes time to recharge, remove Vya from the mount in seconds and insert the integrated USB paddle directly into a computer or USB power outlet – no cables keeps recharging simple and efficient. For the busy commuter that wants premium visibility but a lighting setup that removes in seconds, the smart Vya Pro Commuter Combo is the perfect solution. Features - 200 Lumen Headlight (250 SafePulse) & 100 Lumen Taillight optimized for maximum visibility day and night - Smart sensor technology senses motion and automatically turns lights on when inserted into mount; Auto-off when bike is parked removed from mount - SafePulse beam pattern scientifically designed to enhance a passing driver’s ability to judge the cyclist’s distance and direction of travel without the risks associated with flashing lights - Powerful custom optics to provide a punchy beam visible over 2KM in daylight - USB Mount Receptor allows lights to be securely mounted or removed from bike in seconds with a simple, secure 1/4 turn lock; lights will not turn on when removed from mount and slipped into a pocket or bag - Easy direct USB charging without cables fully charges in 2 hours - Made with bio-renewable material waterproof to 1 meter (when inserted in mount) for all-conditions reliability (IP67 Rated) Headlight Specifications - Lumens: 200 (high), 250 (SafePulse) - Runtime: 120 min (high), 360 min (SafePulse) - Beam Angle: 30° (flood) - Charge Time: 120 min

The Seca Series – reliable, durable, and optimized for trail use – is the ideal choice for the next epic ride with a trail optimized beam pattern and unmatched reliability. The Seca 2000 Lighthead is the perfect choice for those that already own compatible Light & Motion 3 & 6 cell battery packs and want to upgrade their existing lighthead. Features - 4 LED array with CREE LEDs - Custom engineered reflector/optics diffuses flood LED to provide ultra-wide beam pattern and focuses spot LEDs to maximize forward visibility - Additional ‘Race Mode’ feature enables riders to conveniently toggle between high and medium output - Illuminated power button with low-runtime indicator and enhanced tactile engagement specifically for gloves - GoPro mount compatibility - 50-inch rugged cord - Battery not included, compatible with Light & Motion 3 and 6-cell battery packs

Replacement seat post mount for the Tuck e-Bike Taillight. Secure design with non-slip strap ensures light is stationary even in rough, bumpy terrain. - Includes plastic wedge spacers to ensure Tuck mounts at optimum angle for premium visibility

Combining the powerful Urban 900 headlight and Vis Micro II compact tail light, this lighting package provides top level performance and revolutionary safety innovations. Bright amber sidelights gives the cyclist high visibility through intersections with daytime visible pulse patterns so a cyclist is clearly visible day or night. Reliable construction exceeds any other lighting platform on the market and lights are certified to withstand 1 meter drops on concrete and fully sealed to ensure long-term reliability. Featuring multiple modes to maximize run-time, when it comes time to recharge just plug into a USB port with the supplied Micro USB cable. Combining the innovative Urban headlight and compact Vis Micro II taillight, this ultra-powerful package provides maximum safety riders rely on. - 900 Lumen Headlight and 60 Lumen Taillight certified to the FL-1 Standard with premium CREE LEDs - Visibility is enhanced with amber side lighting front and rear providing maximum safety through intersections and high-traffic areas - Pulsing beam pattern enhances a cyclist's distance and speed of travel to passing motorists without the risks associated with flashing lights - Multiple power settings conserve run-time for extended rides - Secure mounting with durable straps prevents lights from moving when riding on uneven/bumpy terrain - Taillight angle can be adjusted for proper placement on steep seat posts and can even be snapped onto a seat bag or backpack - Lights certified to withstand 1 meter drops on concrete for durability and fully sealed to withstand riding in adverse conditions - Charging is reliable and efficient through with included Micro USB cable - Lumens: 900 (high), 450 (medium), 225 (low), 225 (pulse) - Runtime: 90 min (high), 180 min (medium), 360 min (low), 720 min (SafePulse) - Beam Angle: 20° (spot) - Charge Time: 360 min - Fast Charge: No - IP Rating (FL-1: 67 - Depth Rating (FL-1: 1 meter(s) - Impact Resistance (FL-1): 1 meter - Product Weight: 173 grams - Product Dimensions: 1.2" x 1.2" x 4" - Compatible Mounts: Bar, GoPro, Helmet, Seat Post

USB Rechargeable, super bright, compact, quick and easy - there's no reason not to grab a pair of ORB's for your next ride. Features - USB rechargeable - Simple, lightweight, and compact design - Easy installation and switch operation - Universal rubber band - Mount size: ~22-32mm Modes/Run Time - Constant: 2.5 hours - Rapid flashing: 5.5 hours - Slow flashing: 6 hours

The Superflash 65 brings a whole new level of versatility to battery powered tail lights. With four modes (High, Low, Courtesy and Superflash) this tail light provides 65 lumens and 220° of visibility that will get you noticed day or night. - Cree XBD and high output surface mounted LEDs provide 65 lumen output with high, low, Courtesy and Superflash modes - FL1 Tested - Run times: 40 hrs (high – 30 lm), 90 hrs (low – 7 lm), 45 hrs (Courtesy - 20-60 lm) and up to 130 hrs (Superflash - 65 lm) - Provides 220° of visibility - Highly visible, even in daylight - Dust & water resistance rated to IP64 standard - 2 AAA batteries (included) - Includes seat post and seat stay mounts and horizontal clip mount for multiple mounting options - 70 grams

Nothing says, “see me now,” louder than a strong and bright taillight, both for day or nighttime use. With its spherical lens, which directs lumens more than a 1/2 mile (800m) in the brightest California sun, the Stix Elite taillight is the go-to taillight for our infamous Lunch Ride. It’s all about peace of mind, really, and with its six light modes, you get multiple options for day or night visibility. And depending on the chosen mode, this taillight will run for up to 77 hours, and it’s easily charged via built-in USB tab, which eliminates the need for a cable. - 12 to 100 lumens output - Dome lens concentrates output from CREE XBD P4 center LED for 1/2 mile (800m) visibility in the brightest sun. Fresnel lenses for secondary LEDs provide wide angle visibility - 2.5- to 77-hour runtime - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed) - Flexible mounting system works with seatposts from 22.2mm up to 35mm in diameter, plus it's compatible with most seatstays (Aero strap mount available separately) - Six operating modes: Steady High (50 lumens), Steady Low (18 lumens), Power Surge (37 lumens), Power Flash (100 lumens), Disco Flash (40 lumens), Eco Flash (12 lumens) - Red/Green battery charge level indicator - Additional mounting options available separately

A true two-in-one, the Stix Switch comes at you with a ying/yang mindset, flipping between red or white modes depending on your ride needs. Simply press and hold the button and you can go from a bright red taillight to a simple white headlight in seconds. Increase visibility and flexibility with the Stix Switch. - Headlight or taillight—you decide. - Press-and-hold for two seconds to shift between white and red modes. - Three white modes including: Steady (65 lumens), Power Flash (100 lumens), Eco Flash (35 lumens). - Five red modes including: Steady (18 lumens), Surge Glow (16 lumens), Power Flash (30 lumens), Disco Flash (15 lumens), Eco Flash (8 lumens) - 2- to 20-hour runtime. - Fresnel lens for maximum visibility in all directions. - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed). - Flexible mounting system works with handlebar and seatposts from 22.2mm up to 35mm in diameter, as well as most seatstays. (Aero strap mount available separately). - Red/Green battery charge level indicator. - Additional mounting options available separately.